By continuing your visit on the website, you accept Adelio Lattuada S.r.l. may set cookies technical anonymously to enable better navigation.
The strong points of all our products mainly concern their simple use, their long life, the high processing quality and the limited maintenance required thanks to the adopted designing and assembling criteria.
Our pride is also the skill to highly personalize all our models in order to adapt them to the customers' different needs.
To see with the eyes of our customers
Thanks to an augmented reality program dedicated to service, with a tablet or a smartphone it will be possible to provide technical assistance to customers in a simpler and more direct way.
Through the camera of the smartphone/tablet, it will be possible to observe any problem, error, fault or alarm on the machine and solve it more intuitively thanks to 3D icons and indications applied to the real environment.
In this way, it will be possible have a clearer, faster and more economical service, which can therefore reduce downtime and costs caused by machine stops.
For more control of the whole system
In a progressive system the lubricant is pumped into a single input of a "progressive distributor" and is volumetrically divided into a number of points by the progressive movement of the pistons arranged in sequence.
The valves of the distributor are in series with each other, that means that each piston can supply the lubricant only once the previous one has completed its dosing.
An obstructed dispensing point, or a faulty component, will cause the end of operation of all connected progressive distributors. A sensor will signal the alarm, and is necessary only to check a single element to detect the fault in the line block.
One of the major advantages is that allow more control over the correct operation of the entire system and individual outlet points, not just the oil level and the correct operation of the pump.
The new system will then be managed with a new logic based on two different processing parameters of the conveyor, both empty and full.
#1 To personally test Lattuada quality
An absolute novelty will be our mitering machine model TLR 11 AV C PC, fully automatic and in line with the project Lattuada "cyberAL".
- A-WR system: diamond wheels automatic presetting and polishing wheels automatic wear recovery (find out all details, click HERE)
- Digital ammeters: beside guaranteeing a fast and accurate measurement of the tools absorption, they indicate the wear status of each polishing wheel, thanks to a sensor installed on the corresponding spindle - they can also be managed directly from the machine's PC
- Brakes on all polishing spindles
- Motorized glass removal with portable push-button panel
- PLM IOT i-Like Machines software (Lattuada Industry 4.0 project): it collects the machine’s data in order to track the usage both from the producer and from the user
- New PROGRESSIVE lubrication system
Many more are available and can be discovered at our booth: come and discover the future...
The Lattuada Robotic Solution will have a special place: it will consist of two 11-wheels edging machines for the flat edge with arris, equipped also with a dubbing device (model TLR 11 DD PC), a fully automatic glass size reading device and a Kuka robot to connect the two machines.
Some strong points:
- CUSTOMISABLE SUCTION CUPS: vacuum with Venturi system
- HIGH FLEXIBILITY: joint processing of glasses of different sizes with minimum distance between them
- AUTOMATIC MEASUREMENT OF GLASS: pre-setting glass size is not required
- EASE OF USE: straight grinding machines standard maintenance
- AUTOMATIC SPEED ADJUSTMENT: depending on the sizes of the glass
- LOWER COSTS: just one operator required
- HIGHER PRODUCTIVITY: thanks to the high speed of this system
- CONTINUOUS QUALITY CHECK: access to the area
- OPTION OF INTEGRATING: with other machines
CONTINUITY ASSURED: thanks to the low maintenance required by our machines
In addition to the two edging machines above mentioned, in our booth you will also find the following models:
TLR 13 AV C PC: Edging machine with variable angle from 0 up to 45° polished by liquid cerium oxide. This model is part of the TLR series, which is the most used by the major producers of stratified glass for the heavy building industry. Addressed to all glaziers with huge production of glasses with big sizes and great thicknesses, it will be equipped also with a motorized washing machine on the outlet conveyor (model OT 300) and a PC to manage all working phases.
AL 8 M: Electronic straight-line edging machine for the processing of flat edge with arris, polished by cerium impregnated wheel. Having been conceived and manufactured using some of the technological solutions adopted for the larger series of edging machines, such as the assembly of the same spindles, AL M edging machines can handle high production levels. These details contribute towards increasing their useful life, while simultaneously reducing the required maintenance.
GAMMA 713 PC: Straight-line bevelling machine with 11 wheels for the processing of the bevel polished by liquid cerium oxide and with PC to manage all working phases
OT 2000/300/4S: Open top vertical washing and drying machine for glasses with a thickness from 3 up to 25 mm (on request up to 40 mm) and with minimum dimensions of 350 mm. Equipped on the outlet side with a black panel with inspection lights to help the check of the glass cleanliness degree.
CT 2600/500/4S: Closed on top vertical washing and drying machine for glasses with a thickness from 3 up to 25 mm and with minimum dimensions of 350 mm.
Equipped on the outlet side with a black panel with inspection lights to help the check of the glass cleanliness degree. Equipped also with several sensors: glass anti-chute on the outlet conveyor, automatic glass detection at the entrance and to manage various energy saving functions.
The regulation both of the speed and of the glass thickness are motorized, in order to guarantee a high washing quality on every thickness.
TP 1065 - Drilling machine with opposing heads (automatic lower head and manual upper head) with a throating depth of 1.065 mm and equipped with laser centering system and a pneumatic glass support bench. It is particularly recommended for large productions.
Hall 7 - Stand C-01 / E-10
Motorized adjustment of diamond/resin spindles
Tired of performing wheel presetting on vertical edgers? A-WR System is the answer!
- Automatic pre-setting "ZERO" procedure of diamond and resin wheels, without glass and in less than one minute
- Automatic recover of the polishing wheels’ wear
- Automatic positioning for the wheel’s replacement
- Jog increase/decrease of the spindle position (accuracy 0.01 mm)
- Automatic positioning on setpoint
- Automatic backlash recovery
- Automatic spindle cleaning procedure
- Wheels wear warning
- Spindle's problems warning
- Manual unlocking for any situation
WATCH THE VIDEO: https://youtu.be/n0CSq3dLklc
CYBERAL, AUTOMATION AND INTERCONNECTION FOR A TRULY INTEGRATED INDUSTRIAL PRODUCTION
Discover more on: http://cyberal.adeliolattuada.com/
creation of the Adelio Lattuada technical assistance service
starting of the production of first straight-line edging machines - AL series
company's enlargement and offices relocation
starting of the production of the first medium-big sized straight-line edging machines - TL series
starting of the production of the first bevelling machines
company's enlargement and offices relocation to the first factory building of our property
starting of the production of the shaped bevelling and edging machines
production area's enlargement
starting of the production of the straight-line edging machines, TLR series, for the processing of jumbo sheets and great thickness glasses (up to 100 mm)
starting of the production of the first vertical washing machines
introduction in the company of the second Lattuada generation
starting of the production of the straight-line edging machines AL M series, trait d'union between AL and TL families
starting of the production of the straight-line edging machines TLS series, evolution of the TLR family
starting of the production of the first double edgers
celebrations for the first 30 years of the company and creation of a dedicated monograph-website: www.30adeliolattuada.com
realization of the biggest edging machine ever built: 25 metres long per 6 metres high
realization of the first double-edger especially devoted to the small pieces processing.
creation of the minisite tv.adeliolattuada.com: all the videos of the machines and the adventures of Mr. Edge and SuperLattuada just a click away!
realization of the second biggest edging machine ever built, model TLS 15 AV C SP 100
realization of the first closed on top vertical washing machine, model CT 3300
live demonstrations of glass sheets grinding with thicknesses up to 100 mm, moved by a light bridge crane with suction cups, at our booth at Glasstec. Click here to look at the video of the processing of a glass with 60 mm thickness and 350 Kg weight.
realization of a brand-new website: new sections, constantly updated contents and a completely responsive design.